Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1995 >> E 250 Van V8-7.3L DSL Turbo VIN F >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Temperature Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Temperature Sensor: Service and Repair

REMOVAL
1. Disconnect engine oil temperature sensor electrical connector.





2. Approximately 0.94 liters (one quart) of engine oil must be removed prior to sensor removal. Remove one quart of engine oil from high pressure oil pump reservoir using Rotunda Vacuum Tester 014-R1058 or equivalent.
3. Remove engine oil temperature sensor.

INSTALLATION
1. Install engine oil temperature sensor.
2. Connect engine oil temperature sensor electrical connector.
3. Fill engine oil to proper level.
4. Refill oil pump reservoir with engine oil.
pro multis · About Operation CHARM