Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1995 >> E 250 Van V8-7.3L DSL Turbo VIN F >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Control Module: Service and Repair

Powertrain Control Module:





REMOVAL
1. Disconnect battery negative cable.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the strategy.

2. Loosen engine control sensor wiring to PCM connector retainer bolt.
3. Remove engine control sensor wiring connector from PCM.
4. Remove the two PCM seal nuts and loosen left fender liner screws and remove liner or bend down to clear powertrain control module. Remove PCM.

INSTALLATION
1. Follow removal procedures in reverse order.
2. Tighten PCM retainer screw to 3-4 Nm (27-35 in lb). Tighten engine control sensor wiring connector retainer bolt to 4 Nm (35 in lb).
pro multis · About Operation CHARM