Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1995 >> Escort L4-110 1.8L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oxygen Sensor: Service and Repair

REMOVAL

1. Disconnect the battery ground cable.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the adaptive strategy.

2. Raise and support the vehicle.

3. Disconnect the Heated Oxygen Sensor (HO2S) electrical connector.

4. Unscrew and remove the HO2S.

INSTALLATION

1. Apply a thin coating of anti-seize to sensor threads. Install new HO2S into exhaust manifold.

NOTE: Do not contaminate sensing tip with anti-seize compound.

2. Torque sensor to 24-29 Nm (22-36 lb ft).

3. Plug in sensor electrical connector to harness.

4. Lower vehicle.

5. Connect battery ground cable.


pro multis · About Operation CHARM