Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1995 >> Explorer 4WD V6-245 4.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement

NOTE: The Powertrain Control Module (PCM) is located in the left front area of the engine compartment near the battery.

REMOVAL

1. Open hood and disconnect negative battery cable.

2. Remove PCM electrical connector retaining bolt and unplug connector.

3. Remove two nuts andd PCM cover.

4. Remove PCM

INSTALLATION

1. To install PCM, reverse removal procedure

2. Tighten PCM electrical connector to 5-7 Nm (44-62 in lb).

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the PCM relearns its adaptive strategy. The vehicle may need to be driven 16km (10 miles) to relearn the adaptive strategy.
pro multis · About Operation CHARM