Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1995 >> Explorer 4WD V6-245 4.0L >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair

REMOVAL
1. Disconnect negative battery cable and battery to starter relay cable.
2. Remove battery.
3. Disconnect electrical connector at Ignition Control Module (ICM).






4. Remove module mounting bolt and remove ICM.

INSTALLATION
1. Install ICM and attaching bolt. Tighten bolt to 3-4 Nm (27-35 in lb).
2. Connect electrical connector to ICM.
3. Install battery, negative battery cable, and battery to starter relay cable.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
pro multis · About Operation CHARM