Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1995 >> Taurus V6-195 3.2L DOHC SHO >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair







REMOVAL
1. Disconnect battery ground cable.

NOTE: when the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the adaptive strategy.

2. Disconnect both engine control sensor wiring connectors at Ignition Control Module (ICM) by pressing down on locking tabs stamped PUSH and remove engine control sensor wiring connector.
3. Remove ICM retaining bolts and ICM.


INSTALLATION
1. Apply an even coat of approximately 0.80 mm (1/32 inch), of Silicone Dielectric Compound or equivalent to mounting surface of ICM). Install ICM and retaining bolts. Tighten bolts to 2.5-3.5 N.m (22-31 lb-in.)
2. Connect both engine control sensor wiring connectors to ICM.
3. Connect battery ground cable.
pro multis · About Operation CHARM