Cylinder Block Assembly

Cylinder Block Assembly

Disassembly

1. Mount the engine in a work stand and remove all parts not furnished with the new cylinder block (6010) , following the procedures in Disassembly and Assembly.
2. Remove the four cylinder head to block dowels (6A008) and the cylinder block drain plugs.
3. Remove the used cylinder block from the work stand.

Assembly

1. Clean the gasket and seal surfaces of all serviceable parts and assemblies.
2. Position the new cylinder block in a work stand and install the cylinder head to block dowels and cylinder block drain plugs.
3. Transfer all serviceable parts removed from the used cylinder block , following the procedures in Disassembly and Assembly.
4. Check all assembly clearances and correct as necessary.