Preliminary Inspection Notes

WARNING: Always check the fluid level in the brake master cylinder reservoir before performing the test procedures.

If the fluid level is not at the MAX line on the brake master cylinder reservoir, add Heavy-Duty Brake Fluid C6AZ-19542-AA (ESA-M6C25-A) or DOT 3 equivalent.

WARNING: Use of any other than the approved DOT 3 brake fluid will cause permanent damage to brake components and will render the brakes inoperative.

If a brake is locked and the vehicle must be moved, open a bleeder screw on both front wheels to let out enough fluid to relieve the pressure. Close the bleeder screws. This bleeding operation will release the brakes but will not correct the cause of trouble.