Cruise Control Switch: Service and Repair

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven ten miles or more to relearn the strategy.

1. Remove driver side air bag module from steering wheel.
2. Disconnect horn/speed control black wire harness connector from clockspring contact connector located in upper center of steering wheel.
3. Remove two screws from base of each speed control actuator switch, then remove electrical tape from wire connectors located at each upper clip in steering wheel.
4. Disconnect speed control switch wires at untapped wire connectors and remove switches.
5. Reverse procedure to install.