Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1996 >> Aerostar 2WD V6-182 3.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement

Powertrain Control Module:






REMOVAL
1. Disconnect the battery ground cable.

NOTE: When battery voltage is removed from the Powertrain Control Module (PCM), all learned values will be cleared and reset to predetermined values. When battery voltage is restored to the PCM, the vehicle may exhibit certain driveability concerns. It will be necessary to drive the vehicle to allow the PCM to relearn values for optimum driveability and performance.

2. Loosen PCM connector to module bolt and unplug PCM connector.
3. Remove two PCM cover bolts and cover. Remove PCM from bracket.

INSTALLATION
1. To install Powertrain Control Module, reverse the removal procedure.
2. Tighten PCM connector to module bolt to 5-7 Nm (45-61 lb in).
3. Tighten PCM cover bolts to 8-10 Nm (71-88 lb in).

pro multis · About Operation CHARM