Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Resistor: Service and Repair






REMOVAL
1. Working from inside the vehicle, disengage clips and remove upper footwell trim panel from the passenger side.
2. Disconnect wire harness from heater blower motor switch resistor.







3. Insert screwdriver approximately 5 mm (0.2 inch) under edge of heater blower motor switch resistor to disengage retainer and remove heater blower motor switch resistor.

INSTALLATION
1. Position heater blower motor switch resistor on A/C evaporator housing and snap into place.
2. Connect wiring harness.
3. Install upper footwell trim panel.
4. Check blower motor for proper operation at all speeds.