Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1996 >> E 250 Van V8-351 5.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Manifold Pressure/Vacuum Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Manifold Pressure/Vacuum Sensor: Service and Repair

REMOVAL
1. Disconnect battery negative cable.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.

2. Disconnect vacuum source from Manifold Absolute Pressure (MAP) sensor.

Manifold Absolute Pressure (MAP) Sensor:






3. Remove fasteners holding MAP sensor on top of A/C evaporator case.

INSTALLATION
Follow removal procedures in reverse order. Tighten fasteners to 1.5-2.0 Nm (13-17 lb in).
pro multis · About Operation CHARM