Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1996 >> E 250 Van V8-351 5.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Pressure Feedback Exhaust Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pressure Feedback Exhaust Sensor: Service and Repair




REMOVAL
1. Disconnect electrical connector from Exhaust Gas Recirculation (EGR) transducer.
2. Loosen and remove two screws retaining EGR transducer to bracket.
3. Remove two EGR tubes from EGR transducer by pulling downward while twisting gently.
4. If necessary remove two screws and or two nuts and EGR transducer bracket from intake manifold.

INSTALLATION
1. To install, follow removal procedures in reverse.
2. Tighten EGR transducer bracket to upper intake manifold retaining screws to 16-24 N.m (12-18 lb ft).
pro multis · About Operation CHARM