Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1996 >> Mustang V8-4.6L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Pressure Feedback Exhaust Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pressure Feedback Exhaust Sensor: Service and Repair

EGR Valve to Exhaust Manifold Tube:





REMOVAL
1. Disconnect fuel charging wiring connector from Exhaust Gas Recirculation (EGR) Valve backpressure transducer.
2. Disconnect EGR backpressure transducer hoses from EGR backpressure transducer.
3. Remove EGR backpressure transducer retaining nuts and EGR backpressure transducer from transducer mounting bracket.
4. Remove EGR tube heat shield.
5. If necessary, remove the transducer mounting bracket.

INSTALLATION
1. Reverse removal procedure.
2. If transducer mounting bracket was removed, tighten retainers for transducer mounting bracket and EGR tube heat shield to 8-12 Nm (71-106 lb in).
3. Tighten EGR backpressure transducer retaining nuts to 5-7 Nm (40-61 lb in).
pro multis · About Operation CHARM