DT6.2 Verify Integrity of Speed Sensor Connection

^ Verify ignition is OFF.

^ Remove speed sensor connector.

^ Inspect speed sensor component connector for contamination and bent or loose terminals.

^ Gently pull on Circuit 519 (LG/BK) behind Pin A of harness connector.

^ Gently pull on Circuit 523 (R/PK) behind Pin B of harness connector.

^ Are all connections clean and secure?

YES -- Reinstall speed sensor connector. Go to DT6.3. DT6.3 Verify Proper Speed Sensor Wire Routing

NO -- Terminal(s) in component connector are corroded, bent, or loose. Service terminal or connector as needed. If not serviceable, replace speed sensor. Go to DT6.7. DT6.7 Make Sure All Steps Are Completed

NO -- Terminal(s) in harness connector are corroded, bent, or move back or come free of connector. Service terminal or connector as needed. Go to DT6.7. DT6.7 Make Sure All Steps Are Completed