Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1996 >> Taurus V6-182 3.0L >> Repair and Diagnosis >> Restraints and Safety Systems >> Seat Belt Systems >> Service and Repair >> Removal and Installation Procedures >> Front Belt Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Belt Assembly









SPECIAL SERVICE TOOL(S) REQUIRED

- Seat Belt Bolt Bit T77L-2100-A

REMOVAL
1. Remove front seat shoulder strap guide cover.
2. Insert Seat Belt Bolt Bit T77L-2100-A and remove front shoulder strap guide bolt and safety belt anchor bolt.
3. Remove center body pillar inside upper finish panel.
4. Remove front door scuff plate.
5. Remove front safety belt retractor and tongue anchor bolt.
6. Remove web front safety belt guide from B-pillar.
7. Remove front safety belt retractor and tongue assembly from vehicle.

INSTALLATION
1. To install, reverse removal procedure. Be sure to position belts as shown.
2. Tighten all retaining bolts to 34-46 Nm (25-33 lb ft). Cycle system several times to make sure of proper operation of front safety belt retractor and tongue. Make sure the belt is not twisted.
3. Fully extract the webbing to make sure the automatic locking retractor mode is operational. Verify the retractor automatically switches to emergency locking retractor mode once the webbing is fully retracted.
pro multis · About Operation CHARM