Front Door Glass

1. Lower front door window glass approximately 75 mm (3 inches) from full-up position.
2. Remove front door trim panel and watershield. Doors
3. Loosen nut and washer assembly retaining door window glass inner stabilizer.
4. With front door open place hands on each side of front door window glass and pull front door window glass fully into front door glass top run at B-pillar.
5. Set door window glass inner stabilizer so that it is slightly touching front door window glass and tighten nut and washer assembly to 7-10 N.m (62-88 Lb-In).
6. Install front door trim panel and watershield.
7. Cycle front door window glass to verify proper operation.