Auxiliary A/C-Heating
REMOVAL1. Disconnect battery ground cable.
2. Remove both rear passenger seats.
3. Remove the three push pin retainers from the lower edge of the auxiliary heater and air conditioning service cover.
4. Grasp lower edge of the service cover and lift outward and upward to remove cover.
5. Disconnect electrical connectors from the heater blower motor switch and A/C temperature control bracket.
6. Disconnect the wire connector from the heater blower motor switch resistor.
WARNING: DO NOT TOUCH RESISTOR DURING OR AFTER BLOWER MOTOR OPERATION. IT COULD BE HOT AND CAUSE SEVERE BURNS.
7. Remove two retaining screws and the heater blower motor switch resistor.
INSTALLATION
1. To install, reverse Removal procedure.