Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1996 >> Windstar V6-232 3.8L >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor Resistor >> Service and Repair >> Blower Motor Resistor (Main System)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Resistor (Main System)






NOTE: The heater blower motor resistor and thermal limiter assembly are installed on the passenger side of the A/C evaporator housing behind the glove compartment. Use only the specified heater blower motor resistor assembly for service replacement. Do not apply sealer to the resistor board mounting surface.

REMOVAL
1. Disconnect wire harness connector from heater blower motor switch resistor.
2. Remove two retaining screws and remove heater blower motor switch resistor from A/C evaporator housing.

INSTALLATION
1. To install, reverse Removal procedure.
pro multis · About Operation CHARM