Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1996 >> Windstar V6-232 3.8L >> Repair and Diagnosis >> Maintenance >> Drive Belt >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Drive Belt: Service and Repair


Drive belt installation:





NOTE: Minor cracks in the V-grooved portion of the serpentine drive belt are considered normal and acceptable. If the drive belt has chunks missing from the ribs, the drive belt should be replaced. When installing drive belts on pulley, make sure that all V-grooves make proper contact with pulleys.

Conditions requiring drive belt replacement are excessive wear, rib chunkout, severe glazing, frayed cords, etc.. Replace any drive belt that exhibits any of these conditions.

REMOVAL
1. Using a 15 mm socket or wrench on bolt, attach drive belt tensioner pulley. Rotate drive belt tensioner clockwise to remove drive belt from pulleys.

WARNING: USE CAUTION WHEN REMOVING OR INSTALLING DRIVE BELT TO MAKE SURE THAT TOOL DOES NOT SLIP.

INSTALLATION





1. Install drive belt over all pulleys (except drive belt tensioner).
2. Rotate drive belt tensioner over drive belt tensioner pulley. Make sure that all V-grooves make proper contact with pulleys.


pro multis · About Operation CHARM