Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Temperature Sensor ( Ambient / Intake ): Service and Repair

REMOVAL and INSTALLATION
1. Disconnect the battery ground cable.

Mass Airflow Sensor:





2. Disconnect the Mass Air Flow (MAF) sensor electrical connector.

Intake Air Temperature Sensor:





3. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.

Intake Air Temperature Sensor:





4. Remove the IAT sensor.

NOTE: The upper engine air cleaner is shown removed for clarity.

6. Install the IAT sensor and tighten to 8-11 Nm (71-97 lb in).
7. Connect the IAT and MAF sensor electrical connectors.
8. Connect the battery ground cable.