Outside Window Moulding

NOTE: The upper windshield outside moulding can only be replaced when the windshield glass is replaced. This procedure is for the lower windshield outside moulding.

REMOVAL
1. Remove both of the windshield wiper pivot arms by removing the windshield wiper pivot arm nut and pulling straight up.
2. Pull up with a suitable tool to unsnap the lower windshield outside moulding from the clips.
3. Remove the lower windshield outside moulding.

INSTALLATION
1. To install the lower windshield outside moulding, reverse the removal procedure. Adjust the windshield wiper pivot arms as necessary.
2. Tighten the windshield wiper pivot arm nuts to 10-15 Nm (8-11 Lb-Ft).