System Specifications
Tightening Specifications| Bleeder Screw | 7-9 Nm (61-87 lb/in) |
| Clutch Pressure Plate to Flywheel Bolt | 18-26 Nm (13-18 lb/ft) |
| Flywheel-to-Crankshaft Bolts | 112 Nm (83 lb/ft) |
| Clutch Master Cylinder Nuts | 10 Nm (7.4 lb/ft) |
| Slave Cylinder Retaining Bolts | 9-19 Nm (7-14 lb/ft) |
| Bleed Tube Fitting | 14 Nm (10.4 lb/ft) |
| Clutch Slave Cylinder Pressure Line Fitting | 14 Nm (124 lb/in) |
| Clutch Slave Cylinder Bleeder Pipe Fitting | 14 Nm (124 lb/in) |
| Flywheel | Total Indicator Runout (Max.) | 0.2 mm (0.008 in) |
| Clutch Disc | Outer Diameter | 240 mm (9.45 in) |
| Nominal Thickness | 8.84 mm (0.35 in) | |
| Pressure Plate | Outer Diameter | 240 mm (9.45 in) |