Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1997 >> Crown Victoria V8-4.6L SOHC VIN 6 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Service and Repair

REMOVAL
1. Disconnect battery ground cable.
2. Raise vehicle on hoist.
3. Disconnect electrical harness from transmission range (TR) sensor.





4. Remove two retaining bolts.
5. Remove TR sensor.

INSTALLATION
1. Make sure manual control lever is in the NEUTRAL position.
2. Install TR sensor and loosely install two retaining bolts.





3. Align TR sensor slots using Transmission Range (TR) Sensor (MLPS) Alignment Tool T93P-70010-A.
4. Tighten retaining bolts to 7-10 Nm (62-88 inch lbs.) and remove tool.
5. Connect electrical harness to TR sensor.
6. Lower the vehicle.
7. Connect battery ground cable.
8. Check for proper operation with parking brake control engaged. The engine should start only with transmission in PARK or NEUTRAL.
pro multis · About Operation CHARM