Cylinder Head Assembly

TORQUE SPECIFICATIONS

Cylinder Head Bolts:


CAUTION: Always use new cylinder head bolts.






Tighten the cylinder head bolts in the sequence shown.

NOTE: Make sure to tighten the cylinder head bolts in three steps.





Tighten the cylinder head bolts in the sequence shown.





Tighten the cylinder head bolts in the sequence shown.





In the sequence shown, loosen the cylinder head bolt three turns, then tighten the (A) short cylinder head bolt or the (B) long cylinder head bolt to the specification indicated and then tighten the cylinder head bolt the (C) degree indicated.

CAUTION: Do not loosen all of the cylinder head bolts at one time. Each cylinder head bolt must be loosened and the final tightening prior to working on the next bolt in the sequence.

Oil Galley Plugs: 25-40 Nm (19-29 ft. lbs.)