Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement

REMOVAL

CAUTION: Always disconnect the battery ground cable prior to working on the electronic engine controls.

1. Disconnect the battery ground cable. On vehicles equipped with dual batteries, use proper disconnect procedures.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.

2. Remove the air cleaner assembly.
3. Remove the wiring harness retaining bolt and wiring connector cover.
4. Disconnect the wiring harness.





5. Remove the retaining nuts and Powertrain Control Module (PCM).





INSTALLATION
Follow the removal procedure in reverse order. Tighten PCM electrical connector bolt to 5-7 Nm (46-64 lb in).