Front Door Window Regulator: Service and Repair

Heavy Duty Riverter:

Special Tool(s)

REMOVAL
1. Remove the front door trim panel.






2. Raise and support the front door window glass to the full up position.






3. Disconnect the power window motor electrical connector.






4. Remove the nuts.






5. Remove the motor and window regulator assembly.
1. Drill out the rivets.
2. Remove the motor and window regulator.






6. Remove the power window motor.
1. Remove the bolts.
2. Remove the power window motor.

NOTE: Prior to motor removal, ensure the regulator arms are in a fixed position to prevent counterbalance spring unwind.











INSTALLATION
1. To install, reverse the removal procedure.
- Use Heavy Duty Riveter to install the new rivets.
- Cycle the door glass to ensure gear engagement.