Lamp Out Module: Service and Repair

REMOVAL







1. Position message center aside.
1. Grasp the front of the console and lift upward.
^ Position message center console aside.







2. Remove the rear floor console tray.
1. Grasp the console tray and lift upward.
^ Disconnect the power point electrical connector.
^ Disconnect the ash receptacle lamp electrical connector.







3. Remove the lamp out warning module.

NOTE: The lamp out warning module is located under the plastic console reinforcement.

1. Remove the screws.
^ Pull the lamp out warning module forward and out.







4. Disconnect the electrical connector.

INSTALLATION
1. To install, reverse the removal procedure.