A/C Cycling Switch

REMOVAL



1. Disconnect the A/C cycling pressure switch electrical connector.




2. Remove the A/C cycling switch from the top of the suction accumulator/drier.

INSTALLATION
1. Lubricate the new O-ring seal.
^ Use YN-12b Compressor Oil F2AZ-19577-AC or equivalent meeting Ford specification WSH-M1C231-B.




2. Install the A/C cycling switch onto the top of the suction accumulator/drier.




3. Reconnect the A/C cycling pressure switch wiring connector.
4. Check for refrigerant leaks.