Connecting Rod: Service Precautions

CAUTION:
Component Location/Orientation
The location and orientation of each precision machined component should be noted. When engine is assembled each component should be installed in its original position. These components include:
- Rocker arms, push rods, rocker arm seats and valve tappets.
- Crankshaft main bearings and bearing caps.
- Connecting rod bearings and bearing caps.
- Pistons, piston rings and piston pins.
- Camshafts and camshaft journals.

Component Repair
Do NOT ream or hone the pin bore in the connecting rod. Replace damaged connecting rod nuts and bolts or engine damage may occur.