Fluid Level

^ Always check the fluid level in the master cylinder before performing the test procedures. If the fluid level is not between 8 mm (0.31 inch) below the MAX line on the side of the brake master cylinder reservoir and the MAX line, add high performance DOT-3 motor vehicle brake fluid.
^ If the fluid is low it may be due to pad wear. Testing and Inspection
^ If fluid is extremely low or empty or fluid has to be added often, check system for a leak. Testing and Inspection
^ If brake fluid is low, the red BRAKE indicator will illuminate.
^ To add brake fluid, clean and remove cap and pour clean brake fluid into the top of the brake master cylinder reservoir.