Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1997 >> Mustang V6-3.8L VIN 4 >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Washer Switch: Service and Repair






REMOVAL
1. Disconnect battery ground cable.
2. Place a 3.17 mm (1/8-inch) diameter wire pin or small drift punch in hole in steering column shroud under ignition switch lock cylinder. Depress retaining pin while pulling out on ignition switch lock cylinder to remove it from steering column tube housing.
3. Remove four screws retaining steering column shrouds and remove steering column shrouds.
4. Disconnect electrical connectors from multi-function switch.
5. Remove two screws retaining multi-function switch to steering column and remove multi-function switch.

INSTALLATION
1. To install, reverse removal procedure. Tighten two multifunction switch screws to 2.1-2.9 N.m (19-25 Lb-In). Tighten four steering column shroud retaining screws to 0.6-1.0 N.m (6-8 Lb-In).

pro multis · About Operation CHARM