Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1997 >> Ranger 2WD V6-3.0L VIN U >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> Control Assembly, HVAC >> With Manual A/C-Heater >> Heater Blower Motor Switch
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heater Blower Motor Switch

REMOVAL
1. Disconnect battery ground cable.
2. Remove A/C control from the instrument panel.
3. Remove the wire harness hard shell connector from the heater blower motor switch by gently prying with a screwdriver and pulling on the connector.
4. Remove switch knob.
5. Remove the hex-head screw which attaches the heater blower motor switch to the bracket. Remove the heater blower motor switch by rotating it counterclockwise until it is free from the retaining tabs on the A/C control and pulling it straight out the rear of the A/C control panel.

INSTALLATION
1. For installation, follow removal procedures in reverse order.
pro multis · About Operation CHARM