Window Glass: Adjustments

1. Remove front door trim panel and front door trim shield.
2. Lower front door window glass approximately 51-76 mm (2-3 inches) from full UP position.
3. Loosen three nut and washer assemblies from guide assembly.
4. Push front door window glass rearward, within the front door window channel bracket, until it bottoms out within the front door.
5. Move window guide post rearward within retention slot in inner panel. Tighten three guide assembly nut and washer assemblies to 7-11 Nm (62-97 Lb-In).
6. Cycle front door window glass up and down to check position.
7. Install front door trim shield and front door trim panel.