Removal and Installation

NOTE: Do Not pull on the spark plug wire set.

REMOVAL
1. Remove spark plug wires from spark plugs with a Spark Plug Wire Remover tool, pull outward on the boot with a slight side-to-side twist.
2. Loosen spark plugs and remove any dirt or foreign material from spark plug areas of cylinder head with compressed air.
3. Remove spark plugs.

INSTALLATION
1. Inspect and adjust spark plugs.
2. Install spark plugs.
3. Tighten spark plugs to 9-20 N.m (7-15 lb in).
4. Connect spark plug wires to spark plugs.