Battery Tray

REMOVAL
1. Remove battery from vehicle.
2. Disconnect clip on constant control relay module and position out of the way.
3. Remove retaining bolts, screws and washers from battery tray.
4. Remove air cleaner assembly.
5. Remove battery tray from vehicle.

INSTALLATION
1. Position battery tray to front fender apron in engine compartment.
2. Install air cleaner assembly.
3. Install retaining bolts, screws and washers. Tighten each to 8-12 N.m (71-106 Lb-In).
4. Install constant control relay module to battery tray.
5. Install battery in engine compartment.
6. Tighten hold-down spacer bolt to 8-12 N.m (71-106 Lb-In).