Oil Level Sensor: Service and Repair

1. Raise vehicle on hoist.
2. Drain crankcase.
3. Disconnect wiring connector from low oil level sensor.
4. Remove low oil level sensor from oil pan and discard low oil level sensor washer.
5. Install low oil level sensor into oil pan using a new low oil level sensor washer. Tighten low oil level sensor to 27-41 Nm (20-30 ft. lbs.).
6. Fill crankcase with correct viscosity and amount of engine oil XO-1OW30-QSP or DSP meeting Ford specification ESE-M2C153-E.