Crankshaft, Engine

Main Bearing Journal Diameter 63.983-64.003 mm (2.5190-2.198 inch)
Out-of-Round Limit 0.008 mm (0.0003 inch) Max. in 45°, 0.015 mm (0.0006 inch) total
Taper Limit 0.08 mm (0.0003 inch) per 25 mm (1 inch)
Journal Runout Limit 0.05 mm (0.002 inch)(1)(2)
Surface Finish (RMS) 0.25 micrometers (11.8 micro inch)
Thrust Bearing Journal Length 29.725-29.775 mm (1.703-1.1722 inch)
Connecting Rod Journal:
Diameter 58.682-58.702 mm (2.3103-2.3111 inch)
Out-of Round Limit 0.008 mm (0.0003 inch) Max. in 45°, 0.015 mm (0.0006 inch) Total
Taper Limit 0.008 mm per 25 mm (0.0003 inch per inch)
Surface Limit (RMS) 0.3 Micrometers (11.8 Micro inch)
Main Bearing Thrust Face Surface Finish (RMS) (Front) 0.9 Micrometers (0.354 Micro inch)
Main Bearing Thrust Face Surface Finish (RMS) 0.6 Micrometers (0.236 Micro inch)
Runout Limit 0.025 mm (0.001 inch)
Crankshaft Endplay 0.10-0.20 mm (0.004-0.008 inch)


(1) Runout of journals No. 2 and No. 3 to journals No. 1 and No. 4.
(2) Runout of adjacent journals to each other.