Cylinder Head Assembly

GENERAL SPECIFICATIONS
Maximum Distortion (Mating Face): 0.1 mm
Mating Face Height: 2.0 ± 0.12-0.24 mm
Oil Pressure At 800-850 rev/min: 1.3-2.5 bar
Oil Pressure At 4000 rev/min: 3.7-5.5 bar
Gasket Surface Flatness: 0.04/26 mm 0.08/156 mm 0.15 mm Total
Head Face Surface Finish: 0.2/2.5 0.8 mm
Camshaft Bore Inside Diameter No. 1, 2, 3, 4, 5: 45.796-45.821 mm

TORQUE SPECIFICATIONS





Cylinder Head Bolts (Use new cylinder head bolts)
Stage 1: 25 Nm
Stage 2: 45 Nm
Stage 3: 105 degrees
Camshaft Bearing Caps: 15 Nm
Cylinder Head Oil Channel Blanking Plug: 15 Nm