Cylinder Head Assembly

GENERAL SPECIFICATIONS
Combustion Chamber Volume: 44.5 ± 1.5 cc

TORQUE SPECIFICATIONS





Position the RH cylinder head and install new cylinder head bolts with washers and tighten in the indicated sequence in six stages.
- Stage 1: Tighten to 40 Nm.
- Stage 2: Tighten 90°.
- Stage 3: Loosen 360° in reverse sequence.
- Stage 4: Tighten to 40 Nm.
- Stage 5: Tighten 90°.
- Stage 6: Tighten 90°.





Position the LH cylinder head and insert new cylinder head bolts and washers.
- Tighten the cylinder head bolts in the indicated tightening sequence in six stages.
- Stage 1: Tighten to 40 Nm.
- Stage 2: Tighten 90°.
- Stage 3: Loosen 360° (one full turn) in reverse order.
- Stage 4: Tighten to 40 Nm.
- Stage 5: Tighten 90°.
- Stage 6: Tighten 90°.


Cylinder Head Camshaft Journal Cap Bolts: 10 Nm