Spare Key Programming Switch

Precautions:

Note:
- The Spare Key Programming Switch is a New STAR Generation Tester/Service Bay Diagnostic System (NGS/SBDS) programmable switch which provides the capability to enable/disable the normal customer Spare Key Programming Procedure.
- This procedure is in the Owners Manual Spare Key Programming Procedure or in this section under Key Programming Program a Key Using Two Programmed Keys. Program A Key Using Two Programmed Keys
- This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the Spare Key Programming procedure available to the vehicle driver.

Note:
- The spare key programming switch state can be viewed by PATS PID SPAREKY. PATS Parameter Identification Index

Procedure:
1. Insert a programmed ignition key into ignition switch and turn ignition switch from OFF to RUN.
2. Enter NGS/SBDS. Follow the Security Access Procedure to obtain security access.
3. From NGS/SBDS menu:
Select SPARE KEY PROGRAMMING SWITCH to desired setting:
Spare Key Programming Procedure is accessible.
Spare Key Programming Procedure is not accessible.

Note: The default setting on delivery of all new vehicles is .