Rear Antilock Brake System (RABS)

REMOVAL





1. Disconnect the battery ground cable.

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

2. Remove the engine cover.





3. Remove the anti-lock brake control module.
1 Remove the screw.
2 Lower the module assembly.
3 Remove the nuts.
4 Disconnect the electrical connector.

INSTALLATION





1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to driven 16 km ( 10 mi) or more to relearn the strategy.