Connecting Rod
GENERAL SPECIFICATIONSPiston Pin Bore Diameter 21.959-21.979 mm (0.864-0.865 inch)
Crankshaft Bearing Bore Diameter 56.756-56.876 mm (2.234-2.24 inch)
Length (Center-to-Center) 150.7 mm (5.93 inch)
Alignment (Bore-to-Bore Max. Diff.) (a)
Twist 0.050 per 25 mm (0.0015-0.984 inch)
Bend 0.038 per 25 mm (0.0015-0.984 inch)
Side Clearance (Assembled to Crank)
Standard 0.015-0.45 mm (0.0006-0.0177 inch)
Service Limit 0.05 mm MAX (0.02 inch)
a The pin bore and crank bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 105.5 mm on each side of rod centerline.