Timing Gear
| Intake Camshaft Sprocket Bolt The camshaft must be held stationary with an open-end wrench. Do not use the alignment tool to hold the camshaft in position or damage to the camshaft may occur. | 64-72 Nm (48-53 ft.lb) | |
| Exhaust Camshaft Sprocket Bolt The camshaft must be held stationary with an open-end wrench. Do not use the alignment tool to hold the camshaft in position or damage to the camshaft may occur. | Step 1 | 50 Nm (36 ft.lb) |
| Step 2 | --- Remove the TDC peg and Camshaft Alignment Timing Tool. | |
| Step 3 | 115-125 Nm (85-92 ft.lb) |