Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1998 >> F 250 2WD Pickup V6-4.2L VIN 2 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Adjustments


Special Tools:





ADJUSTMENT PROCEDURE
1. Raise and support vehicle.





2. Disconnect the manual lever shift control cable.
3. Disconnect the digital Transmission Range (TR) electrical connector.





4. Remove the manual control lever.
1 Remove the nut.
2 Remove the lever.

CAUTION: Discard outer manual control lever shaft nut. Do not reuse. The old nut will not retain torque specification.

5. Loosen the digital TR sensor bolts.





6. Use Digital TR Sensor Alignment Tool, to align the digital TR sensor slots.

NOTE: Manual shift lever must be in the neutral position.





7. Tighten the bolts.





8. Install the manual control lever.
1 Position the manual control lever.
2 Install a new manual lever shaft outer nut.





9. With the manual lever in overdrive connect the shift lever control cable.
10. Install the digital TR sensor electrical connector.
11. Lower the vehicle.

pro multis · About Operation CHARM