Vehicle Speed Sensor: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.





3. Remove the Vehicle Speed Sensor (VSS).
1 Disconnect the electrical connector.
2 Remove the bolt.
3 Remove the Vehicle Speed Sensor (VSS).





4. Remove the VSS drive gear.
1 Remove the retaining clip.
2 Remove the driven gear.

INSTALLATION
1. Install Vehicle Speed Sensor (VSS) drive gear.
1 Install the drive gear.
2 Install the retaining clip.





2. Install the VSS.
1 Install the VSS.
2 Install the bolt.
3 Connect the electrical connector.

3. Lower the vehicle.
4. Reconnect the battery ground cable.