Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1998 >> Mustang V6-3.8L VIN 4 >> Repair and Diagnosis >> Accessories and Optional Equipment >> Antitheft and Alarm Systems >> Alarm Module >> Service and Repair >> Removal and Installation >> Anti-Theft System, Passive
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Anti-Theft System, Passive






REMOVAL
1. Disconnect battery ground cable.
2. Remove the steering column opening cover assembly and reinforcement to access Passive Anti-Theft System (PATS) module located to right of fuse junction panel.
3. Remove three fasteners retaining module and bracket and one fastener attaching metal brace near module.
4. Disconnect main wiring harness connector and remove PATS module and mounting bracket.

INSTALLATION

NOTE: The PATS module must be reconfigured after replacement. Review information found in the PATS Configuration Command Index. For additional reprogramming assistance, review the help screen on the New Generation STAR (NGS) Tester configuration card.

1. Follow removal procedure in reverse order.
2. Tighten all three screws to 2.4-4.0 N.m (22-35 lb-in).
pro multis · About Operation CHARM