Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1998 >> Mustang V6-3.8L VIN 4 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Idle Speed/Throttle Actuator - Electronic >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Idle Speed/Throttle Actuator - Electronic: Service and Repair

Throttle Position Sensor - 3.8L:






REMOVAL
1. Disconnect battery ground cable.
2. Disconnect fuel charging wiring from Idle Air Control valve (IAC valve).
3. Remove the two idle air control valve retaining bolts.
4. Remove idle air control valve and idle air control valve gasket.

INSTALLATION
1. Clean idle air control valve gasket mating surfaces.

NOTE: If scraping is necessary, do not damage air control valve gasket surfaces or drop gasket material into engine.

2. Follow removal procedure in reverse order.
3. Tighten retaining bolts to 8-12 Nm (71-106 lb-in).
pro multis · About Operation CHARM