Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1998 >> Mustang V6-3.8L VIN 4 >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - A/T >> Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module: Service and Repair

REMOVAL
1. Remove control top panel.
2. Remove transmission control selector dial bezel retaining screws.
3. Lift bezel and disconnect transmission control switch electrical connector from indicator/bulb transmission control switch wire harness.
4. Loosen set screw in forward face of transmission range selector lever knob using an Allen wrench.
5. Remove transmission range selector lever knob and shroud by depressing shift knob button and holding while up firmly. Use caution so as not to lose button and spring.
6. Remove shroud from knob.
7. Remove transmission control switch from knob.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Fully seat the shift knob by gently installing with a rubber mallet.
3. Tighten bezel retaining screws to 2 Nm (17 inch lbs.).
4. Tighten knob set screw.
5. Check the transmission range selector lever for proper operation, make sure the shifter locks in PARK and OVERDRIVE positions.

pro multis · About Operation CHARM