Shift Solenoid Assemblies (SS1, SS2, SS3)

DESCRIPTION
Three ON/OFF solenoids are used for electronic shift scheduling. The three solenoids are located in the main control valve body. The solenoids are two-way, normally open style. Solenoids SS1, SS2, and SS3 provide gear selection of 1st through 4th by controlling the pressure of the three shift valves and the forward clutch control valve.

SS1 SYMPTOMS
Improper gear selection depending on failure mode and gearshift lever position.
- Failed ON-3rd gear only.
- Failed OFF- 1 stand 2nd gear only.

DTCs: P0731, P0732, P0733, P0734, P0750, P0751, P1751

SS2 SYMPTOMS
Improper gear selection depending on failure mode and gearshift lever position.
- Failed ON-1st and 4th gear only.
- Failed OFF-2nd and 3rd gear only.

DTCs: P0731, P0733, P0734, P0755, P0756, P1756

SS3 SYMPTOMS
Improper gear selection depending on failure mode and gearshift lever position.
- Failed ON-No engine braking.
- Failed OFF-No 4th gear.

DTCs: P0734, P0760, P0761, P1761

- May also be generated by some non-electrical transaxle component condition.
- Output circuit check, generated only by electrical conditions.